In general, want to make the groundnut shelling machine seeding laying machine to achieve the ideal operation effect, must make various parts adjusted appropriately, such as sowing depth, spacing, plant spacing, and fertilizer application rate, ridge height, with horizontal and vertical tension degree and the soil volume, according to the agronomic requirements of local and product instructions carefully adjusted.
The technique of the sowing operation of the groundnut sheller:
(1) the adjustment of the row spacing in accordance with the requirements of agronomy work, the seeder seeder location device on both sides of the movement, usually about 28cm. Spacing adjustment according to agronomic requirements and operation the size of seed metering disc replacement, and is generally 12 ~ 15cm.
According to the request against the well liquid, pour the cartridge into the barrel, the inflatable pressure reaches the specified value, the replacement liquid should first unscrew the gas cylinder cover, put open the lid after gas dosing; according to herbicide specification added herbicide, the cartridge case is filled with water, tighten the lid, open the inlet air switch to the barrel, the fertilizer into a fertilizer box, adjust the amount of fertilizer, fertilizer fertilizer is added to remove debris, no box before hardening.
The driving wheel and the ground should maintain a certain pressure, and the compression force can be adjusted by adjusting the compression length of the wheel pressure spring. The curettage plate in front of the driving wheel can not be overadjusted with the ground wheel.
4. The adjustment of the seeding volume is done by the coordination of the different gear between the ground axle and the seed shaft. According to the actual needs, the ground wheel and axle should be matched with the different axis gears of the seed axis, the pitch axis gears with small hole spacing and small teeth. When the gears are enlarged, they should cooperate with the multi axle gears.
In addition, the groundnut shelling machine, in after mulching film, the good side of the wheel pressure film covering film covering device, roll cage soil outlet should be matched with the seed row. At the same time, the whole machine is connected to the small four-wheel tractor at three points. The machine is connected to the tractor's traction part and connected to the limit. When working, the limited zipper will be used.
Contact information:
Skype: serenayan666
Email: serena@machinehall.com
Whatsapp/Mobile: +8618595717505
No comments:
Post a Comment